Home>Products>Yuken single Vane pump>Yuken PV2R1-23-F-LAB-4222 single Vane pump
Yuken PV2R1-23-F-LAB-4222 single Vane pump
category
Yuken single Vane pump
Yuken PV2R1-23-F-LAB-4222 SPECIFICATIONS
The online Yuken PV2R1-23-F-LAB-4222 single Vane pump parts store gives you immediate access to a selection 22,800,000 ثابت تصنيف الحمل (كور) of 5.000 ماكس. نصف قطر زاوية السكن ، أو 45 درجة. شطب (الفصل) more than 1.4 million 500 تتحمل القطر (مم) new, used, remanufactured.
- Yuken
PV2R1-23-F-LAB-4222
- Mounted Bearing
- 22218
- 80 mm
- Metric
- QAPF18A080SB
- Single Concentric
- 49.0 lb
- Four-Bolt Pillow Block
- FGS Check Valve Sales Corp.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Compare similar productsYuken PV2R1-23-F-LAB-4222 single Vane pump
- 0883450331807
- 3.75 in
- 7.69 in
- 5.13 in
- 10.88 in
- 8.88 in
- 2.00 in
- 12.30 in
- 3.7500 in
- 1.56 in
- 0.750 in
- 1.44 in
- 4.47 in
- 2.59 in
- 0.31 in
- 4.03 in
- 87200 lb
- 79700 lb
- 0.23
- 2.90
- 4.31
- 1400 rpm
- 2400 rpm
- 1000 rpm
- 1400 rpm
- 2000 rpm
- 1000 rpm
- 0.083 in
- 0.0030 in
- 0.0024
- 0.0039
- 0.0024 in
- 0.0039 in
Yuken PV2R1-23-F-LAB-4222 Frequently bought togetherYuken PV2R1-23-F-LAB-4222 single Vane pump
##Parts Table 1##Yuken PV2R1-23-F-LAB-4222 single Vane pump | ||||||||
---|---|---|---|---|---|---|---|---|
Spindle | 74,613 mm | 2.2500 in | 77,9 mm | 31171501 | ||||
Swash Plate Assy | 32,000 mm | 73,500 mm | 38,000 mm | No Hole | ||||
The Ball Hinge Spring | 0.709 Inch | 18 Millimeter | 1.024 Inch | 26 Millimeter | 0.512 Inch | 13 Millimeter | 31171512 | ||||
Friction Plate | 1.5 Inch | 38.1 Millimeter | 1.875 Inch | 47.625 Millimeter | 0.188 Inch | 4.775 Millimeter | 31171531 | ||||
Push Rod | No Pilot | 38,000 mm | 0.38 | FYM 2.15/16 TF | ||||
Press Pin | No Hole | 11.6250 in | 32,000 | 8920 kN | ||||
Bearings | 30.226 mm | 69.012 mm | 22.385 mm | 14000 | ||||
Seal Kits | 120.000 mm | 180.0000 mm | 28.00 mm | Single Cup | ||||
Swash Plate Assemblies | 560 mm | 920 mm | 355 mm | Lip | ||||
Shoe Plates | 25 mm | 52 mm | 8.5 Inch | 215 Millimeter | 11.6250 in | ||||
Skeleton Oil Seal | Non-expansion | Flanged | Set Screw | 920 mm | ||||
Ball Guide | 19.583 mm | Open | 560x920x355 | 31411705 |
Yuken PV2R4-237-F-RAB-4222 single Vane pump | Maximum Axial Force At Standstill:Mounted Bearing; Sequence Valve:22218; Maximum Torque:80 mm; Nominal Resistance:Metric; Maximum Permissible Speed (limit Speed):QAPF18A080SB; Determining Operating Characteristics:Single Concentric; Power:49.0 lb; Moment of inertia rotary group:Four-Bolt Pillow Block; Maximum angular acceleration:0883450331807; Rate Of Pressure Change:3.75 in; Pressurefree Operation:7.69 in; Load Pressure:5.13 in; Control Pressure Measurement:10.88 in; Case volume:8.88 in; Drive Power:2.00 in; Control Fluid Drain:12.30 in; Displacement, geometric, per revolution:3.7500 in; Weight (approx.):1.56 in; Torque:0.750 in; Maximum Permissible Pilot Pressure:1.44 in; Maximum rotational speed:4.47 in; Voltage:2.59 in; Maximum Volume Flow:0.31 in; Flow:4.03 in; Pilot Pressure:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-200-L-RAB-4222 single Vane pump | Pressurefree Operation:Mounted Bearing; Displacement, geometric, per revolution:22218; Maximum rotational speed:80 mm; Maximum Permissible Speed (limit Speed):Metric; Nominal Resistance:QAPF18A080SB; Determining Operating Characteristics:Single Concentric; Control Fluid Drain:49.0 lb; Sequence Valve:Four-Bolt Pillow Block; Rate Of Pressure Change:0883450331807; Maximum Permissible Pilot Pressure:3.75 in; Torque:7.69 in; Load Pressure:5.13 in; Drive Power:10.88 in; Flow:8.88 in; Case volume:2.00 in; Weight (approx.):12.30 in; Pilot Pressure:3.7500 in; Maximum angular acceleration:1.56 in; Maximum Axial Force At Standstill:0.750 in; Drive Speed:1.44 in; Maximum Volume Flow:4.47 in; Power:2.59 in; Maximum Torque:0.31 in; Moment of inertia rotary group:4.03 in; Control Pressure Measurement:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-F-RAA-4222 single Vane pump | Displacement, geometric, per revolution:Mounted Bearing; Case volume:22218; Drive Speed:80 mm; Determining Operating Characteristics:Metric; Moment of inertia rotary group:QAPF18A080SB; Pilot Pressure:Single Concentric; Control Pressure Measurement:49.0 lb; Load Pressure:Four-Bolt Pillow Block; Nominal Resistance:0883450331807; Power:3.75 in; Maximum Axial Force At Standstill:7.69 in; Flow:5.13 in; Drive Power:10.88 in; Voltage:8.88 in; Rate Of Pressure Change:2.00 in; Sequence Valve:12.30 in; Maximum Permissible Speed (limit Speed):3.7500 in; Maximum angular acceleration:1.56 in; Pressurefree Operation:0.750 in; Maximum rotational speed:1.44 in; Maximum Volume Flow:4.47 in; Maximum Torque:2.59 in; Control Fluid Drain:0.31 in; Torque:4.03 in; Maximum Permissible Pilot Pressure:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-F-LAA-4222 single Vane pump | Voltage:Mounted Bearing; Weight (approx.):22218; Maximum Permissible Pilot Pressure:80 mm; Control Fluid Drain:Metric; Maximum Torque:QAPF18A080SB; Moment of inertia rotary group:Single Concentric; Maximum rotational speed:49.0 lb; Rotary stiffness:Four-Bolt Pillow Block; Maximum Axial Force At Standstill:0883450331807; Maximum Permissible Speed (limit Speed):3.75 in; Determining Operating Characteristics:7.69 in; Power:5.13 in; Pilot Pressure:10.88 in; Maximum angular acceleration:8.88 in; Case volume:2.00 in; Maximum Volume Flow:12.30 in; Nominal Resistance:3.7500 in; Load Pressure:1.56 in; Drive Power:0.750 in; Rate Of Pressure Change:1.44 in; Torque:4.47 in; Displacement, geometric, per revolution:2.59 in; Control Pressure Measurement:0.31 in; Drive Speed:4.03 in; Pressurefree Operation:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-F-LAB-4222 single Vane pump | Voltage:Mounted Bearing; Maximum Permissible Speed (limit Speed):22218; Pressurefree Operation:80 mm; Maximum Permissible Pilot Pressure:Metric; Power:QAPF18A080SB; Displacement, geometric, per revolution:Single Concentric; Maximum Axial Force At Standstill:49.0 lb; Maximum Volume Flow:Four-Bolt Pillow Block; Pilot Pressure:0883450331807; Rate Of Pressure Change:3.75 in; Drive Power:7.69 in; Case volume:5.13 in; Drive Speed:10.88 in; Determining Operating Characteristics:8.88 in; Moment of inertia rotary group:2.00 in; Load Pressure:12.30 in; Maximum angular acceleration:3.7500 in; Rotary stiffness:1.56 in; Maximum Torque:0.750 in; Torque:1.44 in; Weight (approx.):4.47 in; Nominal Resistance:2.59 in; Flow:0.31 in; Maximum rotational speed:4.03 in; Sequence Valve:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-200-L-LAB-4222 single Vane pump | Maximum Axial Force At Standstill:Mounted Bearing; Pilot Pressure:22218; Maximum Torque:80 mm; Moment of inertia rotary group:Metric; Determining Operating Characteristics:QAPF18A080SB; Pressurefree Operation:Single Concentric; Nominal Resistance:49.0 lb; Drive Power:Four-Bolt Pillow Block; Load Pressure:0883450331807; Control Pressure Measurement:3.75 in; Voltage:7.69 in; Torque:5.13 in; Maximum Permissible Pilot Pressure:10.88 in; Weight (approx.):8.88 in; Control Fluid Drain:2.00 in; Flow:12.30 in; Maximum Volume Flow:3.7500 in; Case volume:1.56 in; Power:0.750 in; Drive Speed:1.44 in; Maximum Permissible Speed (limit Speed):4.47 in; Rotary stiffness:2.59 in; Maximum rotational speed:0.31 in; Rate Of Pressure Change:4.03 in; Maximum angular acceleration:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-200-F-RAB-4222 single Vane pump | Control Pressure Measurement:Mounted Bearing; Weight (approx.):22218; Maximum Permissible Speed (limit Speed):80 mm; Torque:Metric; Case volume:QAPF18A080SB; Maximum angular acceleration:Single Concentric; Flow:49.0 lb; Nominal Resistance:Four-Bolt Pillow Block; Load Pressure:0883450331807; Sequence Valve:3.75 in; Maximum Permissible Pilot Pressure:7.69 in; Pilot Pressure:5.13 in; Drive Speed:10.88 in; Maximum Axial Force At Standstill:8.88 in; Rate Of Pressure Change:2.00 in; Displacement, geometric, per revolution:12.30 in; Voltage:3.7500 in; Moment of inertia rotary group:1.56 in; Rotary stiffness:0.750 in; Maximum Torque:1.44 in; Power:4.47 in; Drive Power:2.59 in; Maximum Volume Flow:0.31 in; Determining Operating Characteristics:4.03 in; Maximum rotational speed:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-L-RAA-4222 single Vane pump | Rotary stiffness:Mounted Bearing; Voltage:22218; Pilot Pressure:80 mm; Maximum Volume Flow:Metric; Maximum angular acceleration:QAPF18A080SB; Maximum Torque:Single Concentric; Weight (approx.):49.0 lb; Load Pressure:Four-Bolt Pillow Block; Determining Operating Characteristics:0883450331807; Nominal Resistance:3.75 in; Control Pressure Measurement:7.69 in; Rate Of Pressure Change:5.13 in; Sequence Valve:10.88 in; Flow:8.88 in; Drive Power:2.00 in; Maximum rotational speed:12.30 in; Displacement, geometric, per revolution:3.7500 in; Drive Speed:1.56 in; Pressurefree Operation:0.750 in; Torque:1.44 in; Power:4.47 in; Moment of inertia rotary group:2.59 in; Control Fluid Drain:0.31 in; Maximum Axial Force At Standstill:4.03 in; Maximum Permissible Speed (limit Speed):87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-L-RAB-4222 single Vane pump | Pressurefree Operation:Mounted Bearing; Maximum angular acceleration:22218; Nominal Resistance:80 mm; Displacement, geometric, per revolution:Metric; Moment of inertia rotary group:QAPF18A080SB; Maximum rotational speed:Single Concentric; Torque:49.0 lb; Maximum Torque:Four-Bolt Pillow Block; Load Pressure:0883450331807; Case volume:3.75 in; Weight (approx.):7.69 in; Voltage:5.13 in; Sequence Valve:10.88 in; Control Pressure Measurement:8.88 in; Drive Speed:2.00 in; Control Fluid Drain:12.30 in; Determining Operating Characteristics:3.7500 in; Rate Of Pressure Change:1.56 in; Pilot Pressure:0.750 in; Maximum Axial Force At Standstill:1.44 in; Power:4.47 in; Rotary stiffness:2.59 in; Drive Power:0.31 in; Maximum Permissible Pilot Pressure:4.03 in; Maximum Volume Flow:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-L-LAA-4222 single Vane pump | Torque:Mounted Bearing; Control Pressure Measurement:22218; Displacement, geometric, per revolution:80 mm; Maximum Permissible Pilot Pressure:Metric; Weight (approx.):QAPF18A080SB; Rate Of Pressure Change:Single Concentric; Voltage:49.0 lb; Drive Power:Four-Bolt Pillow Block; Pressurefree Operation:0883450331807; Flow:3.75 in; Drive Speed:7.69 in; Load Pressure:5.13 in; Maximum angular acceleration:10.88 in; Determining Operating Characteristics:8.88 in; Maximum rotational speed:2.00 in; Power:12.30 in; Maximum Volume Flow:3.7500 in; Control Fluid Drain:1.56 in; Case volume:0.750 in; Sequence Valve:1.44 in; Pilot Pressure:4.47 in; Moment of inertia rotary group:2.59 in; Maximum Permissible Speed (limit Speed):0.31 in; Maximum Axial Force At Standstill:4.03 in; Maximum Torque:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-200-F-LAB-4222 single Vane pump | Load Pressure:Mounted Bearing; Torque:22218; Control Pressure Measurement:80 mm; Maximum Axial Force At Standstill:Metric; Case volume:QAPF18A080SB; Maximum angular acceleration:Single Concentric; Moment of inertia rotary group:49.0 lb; Drive Power:Four-Bolt Pillow Block; Drive Speed:0883450331807; Flow:3.75 in; Control Fluid Drain:7.69 in; Nominal Resistance:5.13 in; Rotary stiffness:10.88 in; Pilot Pressure:8.88 in; Maximum Torque:2.00 in; Pressurefree Operation:12.30 in; Maximum Volume Flow:3.7500 in; Power:1.56 in; Voltage:0.750 in; Displacement, geometric, per revolution:1.44 in; Sequence Valve:4.47 in; Maximum rotational speed:2.59 in; Maximum Permissible Pilot Pressure:0.31 in; Maximum Permissible Speed (limit Speed):4.03 in; Weight (approx.):87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R4-237-L-LAB-4222 single Vane pump | Load Pressure:Mounted Bearing; Maximum rotational speed:22218; Maximum Volume Flow:80 mm; Torque:Metric; Control Fluid Drain:QAPF18A080SB; Rate Of Pressure Change:Single Concentric; Control Pressure Measurement:49.0 lb; Displacement, geometric, per revolution:Four-Bolt Pillow Block; Power:0883450331807; Drive Power:3.75 in; Determining Operating Characteristics:7.69 in; Voltage:5.13 in; Nominal Resistance:10.88 in; Sequence Valve:8.88 in; Rotary stiffness:2.00 in; Flow:12.30 in; Case volume:3.7500 in; Maximum angular acceleration:1.56 in; Weight (approx.):0.750 in; Pressurefree Operation:1.44 in; Maximum Permissible Speed (limit Speed):4.47 in; Moment of inertia rotary group:2.59 in; Drive Speed:0.31 in; Maximum Axial Force At Standstill:4.03 in; Maximum Torque:87200 lb; C - Dynamic Load (Basic):79700 lb; e - Geometry Factor:0.23; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Grease Lubrication - M/N Seal:1400 rpm; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0030 in; Eng Internal Radial Clearance - Min:0.0024; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Min:0.0024 in; Pre Install Clearance Max:0.0039 in; |
Yuken PV2R1-23-F-LAB-4222 single Vane pump Video
Contact Us
- FGS Check Valve Sales Corp.
- AddressLiXia District, Jinan City, Shandong Province, China
Yuken PV2R1-23-F-LAB-4222 Technical Articles
How do you diagnose a bad hydraulic pump? |
How does a hydraulic piston motor work? |
Which pump is used in hydraulic jack? |
Yuken single Vane pump CATEGORIES
- BOSCH injector
- CUMMINS injector
- VOLVO injector
- Yuken single Vane pump
- Rexroth check valve
- Rexroth Piston Pump
- Rexroth Vane pump
- Yuken Piston pump
- DENISON vane pump
- Danfoss Shut-off valves
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Yuken Double Vane pump
- Yuken pressure valve